Tuesday, 30 September 2014

Reannag Teine

An Atlantia I know, Glaukos the Athenian linked an interesting site on the book of faces today - a pottery studio in California which seems to specialise in SCA stuff. Seems they need votes to qualify for a local grant so they can expand their studio. I totally support artists like this (and wish I could buy more of their work). I've attempted to vote for them to receive this grant but it doesn't want to let me, possibly because I'm Australian? Anyway, the voting at this stage is just to get them to consideration. From the bios of the past winners, they're up against a challenge and really need to sell their product, their research and their involvement in the community.

http://www.reannagteine.com/

This family team in California are doing many of the things I'd like to try. They have the advantage of being a team, and having a resident potter. Their designs are lovely and I cannot believe how cheap they are selling some of their products for!


Their attempt at the 1480 Faenza Peacock (on right)

Saturday, 20 September 2014

Project 35 - Aneala cups

Hey there, long time no post!
I've been working on some gifties recently, so haven't been able to post progression pics or really anything until after they've been handed over. So ceramic project number 35: Aneala cups.

HRM Liaden asked me to make some items for the Baron and Baroness of Aneala who are stepping down today (this post is specifically scheduled so as not to ruin the surprise). The Baron and Baroness are Kilic ibn Sungur ibn al-Kazganci al-Turhani   and   Branwen of Werchesvorde. Given they're on the opposite side of the country (it'd take me at least two days to drive there), I don't really know these folk. So I turned to the trusty internets. (turns out they're both Laurels - eep)

First up I googled Branwen of Werchesvorde. From the Lochac Laurels website "Member for roughly 25 years, Current Baroness of the Barony of Aneala. Master Rank in the College of Scribes, holds Scribal classes in corrupting novice scribes. Is married to the wonderful Dede (Master) Kilic who has in turn corrupted her into Middle Eastern culture. Master Rank in the Lochac Cook’s Guild.
Her Excellency Baroness Mistress Branwen is highly active in the scribal arts, and has interests in Middle-Eastern culture and pavilion-making, textiles as in weaving, dyeing and printing, learning embroidery, leatherworking, glass bead making."

Generic middle eastern - perhaps I could make some more of the lovely Iranian things I've been contemplating?

To see if I could get something more specific I googled Kilic and happily I found a bunch of information on his persona. From the Aneala website: "Kilic ibn Sungur ibn al-Kazganci al-Turhani is a Turkic nomad from the Early 13th Century. Kilic was bought from his parents at market in Samarkand and raised as a Ghulam or slave soldier. He served his master well and when his master passed away took service with a number of different rulers, warrior lords and merchants particularly in the unsettled regions of Rum. Like any good nomad he has become a jack of all trades and has tried his hand at various crafts including woodwork, leatherwork, metalwork, armouring, tent making, cooking and hats – definitely likes hats."

And from the Lochal Laurel website " Kilic is a 13th centruy ghulam serving one of the lesser Amirs in the Artuqid empire. He divides his time between the court of one of the beglerbegs and various skirmishes and campaigns. He prefers the latter as he considers the courtly life to be for those who have lost the will to live. At the moment he is looking to acquire some land and settle down, although not too settled. He knows more than is humanly safe about all things Middle Eastern and gets accused of being a walking reference library at least once a week."

I knew Kilic didn't represent any of the ceramic work I'd done so far so I started researching Seljuk and Artuqid. From the very short article on Wikipedia (yes, I know that's not real research), I determined that Kilic would have originated from the Harput branch (later in period. I then started researching 13th century Turkish ceramics with a vengeance and landed on the work originating from Port St Symeon.


This bowl is lovely and is perfect for Kiric's persona there are but two problems. One; I had a rather limited project time, so carving two bowls like this before glazing wouldn't be viable. It'd be totally easy if I made my own bisque, but I don't, yet. Problem two; Alex the Potter already makes this style of ceramic and I don't want to be stepping on his toes. So, that put a stop to items that'd suit Kiric.

So I was stuck. Her Majesty originally wanted a matched set for each of the B&B's. Given I'm organising an event and attending badger retreat, I don't have that sort of time. For the Kilic and Branwen I decided to go with the cups that I've been doing lately. They're perfect for tea and while may not match their current feasting kit, will come in handy for longer events. I decided to go with something I know they'd like - their own heraldry. I've documented heraldry on cups for later periods and more western locals. Given that I'm turning away from a 100% period piece, I decided to do a symbolic piece.

I downloaded their heraldry from the Lochac Roll of Arms (Thanks Master William!) and set about making the cups. I wanted the heraldry to take up as much of the space of possible so used the same shield template I had for Aliette's cup. I added some swan supports (for Aneala / Western Australia) and some trailing acanthus leaves. I had considered having the swans wearing baronial coronets around their necks, but thought that wouldn't quite work.






Branwen's heraldry:
Per pale azure and gules,a raven within an annulet argent.
Kirik's heraldry:
Sable, a sheaf of five swords argent within aorle Or.

Branwen's cup with swan supporters at base. The acanthus are counterchanged so they retain contrast with the body of the shield.



 A slightly blurry image of the two cups.

I'm rather happy with how these cups turned out even if the backs are blank. There will be no mistaking who owns these and even though they aren't middle eastern, I hope their recipients are pleased with them.

Thursday, 14 August 2014

Things in the Rijks Museum

Dragon Jug featuring plumed pidgeon.

Plates!

Painted glass jug






Monday, 11 August 2014

Project 34 - Krae Glas baronial birthday platter PT 4

Step 4 - Apply shading.

In step three I tried two different methods of shading. Method one mixed 50/50 yellow and black (lower belly) and method 2 diluted the black (one drop black to three drops water) and used it as a wash. Pre-firing they both looked a bit sketchy but the black wash went on smoother. Post-firing, the black wash is chunkier and doesn't present the smooth grading I need for this project.

For the final piece I decided to go with the black wash but this time I diluted it 1:5 and mixed it extremely well to ensure there were no chunks of pigment. The wash went on nicely. The shading turned out pretty well. The only thing I'd change next time would be the shading on the back of the sea-dragons. It should be horizontal not vertical allowing it to conform to the shape of the beast better.

I picked up the plate the morning of the event, and as usual, forgot to get a photo.

Project 34 - Krae Glas serving plate for Day of Honour 2014 - Picture by Baron Cormac.

Wednesday, 6 August 2014

Project 34 - Krae Glas baronial birthday platter PT 3

Step 3 (should have been step 2): Determine the colour pallet. Experiment on a piece of scrap ceramic with blends and shades of glaze. The fired piece gives a good approximation of how the finished glazes will look and will guide my technique. One thing is for sure, I'm going to need a finer brush or more steady hand.




Monday, 4 August 2014

Ceramic treasures

During our recent trip to Europe, we took a side trip to Italy. To be specific: Sicily to see volcanos. While in Sicily I had the opportunity to pick up some lovely ceramics. These are the lovely things I couldn't help but bring home. I'll post picks of some of the items that stayed behind later.


First up is what we've taken to calling the wine fish. This thing was a challenge to bring home with all it's knobbly bits. I was so worried something would get knocked off during the day and a half of plane flights. The winefish has three candle holders as his crest and a mouth wide enough to hold a bottle of wine, or salt or sliced bread. Under the blue glaze he also has scales carved into his body.  I've never seen anything like him in my research but I tend to look at plates and cups so I'll have to do some more digging to document him.

This is the wine fish in his new home next to the plate and dish I also acquired. The shop-keeper called these "pre-majolica". I'm going to spend some time soon looking for the museum pieces that inspired these designs.  I am so glad these made it back to Australia with me. Soon I'll have an update on what I've found out about the artist, the inspiration pieces and the items I had to leave behind.

Sunday, 3 August 2014

Project 34 - Krae Glas baronial birthday platter PT 2

Step 2: Determine your colour layout. I spent some time with a basic sketch of the elements trying to decide which colours would go where. I've determined that the four main seabeasts will be gold, while the rest of the design will be blue. I may skip the red of the original images to retain the balance, and the Krae Glas colour scheme.


The yellow elements were painted first, then the octopus and the Krae Glas populous devices. Finally the wave motif was painted in and the whole background was given a simple blue wash. I contemplated using a different blue for the background but decided that if I was careful enough the depth of glaze would be apparent. I haven't used a wash since trying to duplicate patina on my first plate. I hope this works out well.



Monday, 7 July 2014

Project 34 - Krae Glas baronial birthday platter PT 1


So this project is going to be both complex and time consuming. It is due mid August for the Krae Glas baronial birthday event, Gionnata de honnor (or whatever it is this year). I started it about a month ago, but accidently knocked my heater over and smashed it (above) . As I'm starting over (and I have a phone, with camera now) I've decided to document all the steps I can...


Extant plate: 1525, Italy. The Met Museum, item no. 41.100.277

(Pre-step - rummage in the Met, V&A, British museum and all other resources to find extant pieces that fit your requirements. Eventually settle on one main design, print sections of this for reference later.)

Step 1: Take some tracing paper and trace around the outside of your dish. The fold this in half and trace the design elements you like onto one half of the sheet. Reverse the fold and trace over your half design. This results in a lovely mirror image. It took me three hours to get the shapes and balance right on the smashed plate. I'm not completly copying the extant piece as I don't like the creepy cherub faces or the random fruits. I wasn't entirely happy with some of the elements on the smashed plate, so I spent another hour tweaking them while doing the tracing (thus the chunkier left dolphin)


Step 2: On the wrong side of the tracing, rub a 6B pencil, as shown in the top half of the above image. Ensure all lines are covered in pencil dust THEN go wash your hands.

Step 3: Lay the tracing paper on the plate, pencil side down. Carefully draw over your original design. When you remove the paper, the pencil rubbings should have transfered your design across. Don't worry about the rubbings, they'll burn off in the kiln.


More steps to come as I complete them, stay tuned....


Sunday, 6 July 2014

Ceramic 32 - Janet's Bowl

Item 32 - only 18 more to do, in 10 months!

The finished bowl - on it's side, it sort of looks like her device.
This was created to complete Elizabet's set so I could enter it in the Midwinter Crown-anation A&S competition (tableware). I barely managed to get the bowl fired before delivering it to Sir Wolfram and Mistress Genna to take to Cold-berra for me.

The whole set, the cup is still my favourite piece - the plain white is nicer and the cats better, also, sleeping kitten.

 

The bowl was inspired by the same design as the plate and the cup. The full documentation submitted to the A&S competition was the subject of my last post.  I'm positing it again because it needs further discussion. From the picture above, you can see that the red on white design is alot sparser than it was on the plate. I was mostly working from images of the other two items rather than the extant piece (I'd lost the bit of paper). This interpretation of the design looks more modern to me. I am quite happy that when viewed on the side (image 1), it does look like her heraldry.

The one problem I have with this item is the fact the glaze has slumped (the sort of blurry drips - below). I didn't know about this when writing up my documentation because I hadn't yet seen the fired bowl. I think the glaze slumped due to two reasons, 1. I initially had three white circle designs on the outside (as on the inside) but it looked to sparse. So I sort of sanded the glaze back a little and re-painted the entire outside. (I'd also rubbed quite a bit of it down accidentally while painting the inside so it needed re-doing anyway). Because I couldn't be sure which areas needed a new covering, the whole thing got coated properly. As a result, there may be areas which received five layers of under-glaze. This, combined with the steep sides, has allowed the overglaze to drip and slump a little. As well, it's still rather pretty and Elizabet has a whole set now (and I've actually completed a set, something I usually avoid). Lesson learned for next time.





Saturday, 5 July 2014

Tableware documentation - Ceramics 27, 28 and 32.

I entered Lady Elizabet's ceramics in the Midwinter Crown-o-nation A&S competition for tableware. The following is the 10 pages of documentation I submitted. I've posted about her plate and cup but picked up the bowl only two hours before I had to get it over the other side of the city so Mistress Genna and Sir Wolfram could deliver it to the event. If you've been following this blog you've probably seen quite a bit of this text.




Tableware – Lochac Midwinter A&S competition
Entry & documentation by Antoinette Travaillie – the College of St Monica

What: Lady Elizabet’s ceramic tableware set – plate, cup and bowl (hand glazed commercial bisque)
Where: Manises, Spain
When: 15-16th Century
Motivation: I started this set being inspired by an imaged Lady Alliette linked to facebook of a 1450’s earthenware plate featuring a cat. As Lady Elizabet has a rather lovely device (Figure 1) (and has made me some wonderful silk banners) I decided to recreate the plate for her. Then, obviously, she and Alliette needed mugs with cats on to make them both smile. When I eventually found out about the A&S competition, I thought I’d borrow the items back and enter them, and thank Elizabet for the loan with a matching bowl (also it completes the set).

Figure 1: Lady Elizabet Hunters device as interpreted by Countess Constanzia.

General Technique: Between 15th-16th centuries there were a number of ceramic centres throughout Italy and Spain (eg. Manesis, Deruta). Earthenware plates and bowls would be moulded, fired and then ceramic artists would glaze them typically with tin based glazes. These processes were usually handled by different specialists. (the V&A website has some detailed information related to earthenware production).
For these three items, I have used commercially produced bisque. I have then glazed it with commercial (and modern) glazes. To achieve a solid colour, the under-glaze must have three layers painted on. This takes some time, but is important to prevent thick lines or splotchy colours. Where white decoration is required, it is either left blank or the coloured glaze is scratched back with a wooden skewer to reveal the ceramic underneath. A clear over-glaze is then applied before firing which I get done at a professional service.

Materials:  The bisque I purchase comes in a limited set of shapes. This restricts the items I can do and how closely I can replicate items due to changes in scale or shape. For each of the items presented here, the bisque choice has driven the design selection.
The main difference between my work and that of the workshops in Manises is that I use commercial glazes. These glazes come pre-mixed and are usually a consistent colour. They also contain no toxic substances and due to the over-glazing process result in a product that is dishwasher, microwave and most importantly food safe. Many medieval items utilise a lead based glaze as it can create a higher intensity in colours like red.
The main inspiration for all of these pieces (Figure 2) features background decoration in lustre typical of Manesis at this time. I currently do not have the resources to experiment with lustre and the firing service I use will not accept pieces that have been glazed in products sourced externally. I have substituted standard glazes for this instead.

Documentation (divided by object):
Plate
I was initially reluctant to paint this design as the cat itself is too pointy for my taste. Then I realised that the aim of this plate was not to reproduce an extant sample, but to make something in a medieval style for a modern day SCA use. So I adapted it a little to best represent Elizabet’s heraldry.

Figure 2: Dish featuring a Cat. 1400-1450, Spanish, Manises. Tin Glazed Earthernware. 34.6x5.5cm.  Accession number 56.171.115, Metropolitian Museum of Art.

Adaption: In keeping with Elizabets device, I have flipped the cat to sinister and painted the bottom third of the plate in red. I have retained the decorative elements (originally in lustre on the extant piece) and used them to tie the whole plate together. I have also adapted the cat from the pointy, toothy one above to something closer to the interpretation of her device that she likes best. I've retained the long legs but made the cat appear more fluffed up and protective which I think fits Elizabet better.

Figure 3: The finished plate.

Cup
Shape: Unlike the plate, there is no generic ceramic cup shape for the time period I was examining. Many people were using glass cups at this time as well. As I had to utilise what bisque was available to me and I didn’t want to have a handle, I purchased the only one available and reverse documented it. Figure 4 and 5 show the barrel shape in both glass and earthenware.
Figure 4: Barrel shaped 16th Century glass beaker, glass, The British Museum, item 1878,1230.268

Figure 5: 1634 - Barrel shape with handle, tin-glazed earthenware, The British Museum, item 1887,0210.117

Decoration: Extant cups were decorated with lustre in a style similar to plates and bowls of the time. I decided to adapt the pattern used on the plate to the cup and keep the top of the cup white. This also allowed me to avoid the warped look of the circular features that would be caused by the slope of the cup sides. I also changed the style of the cat to match Constanzia’s interpretation better as it’s more aesthetically pleasing. I added my own touch to the cups to make Elizabet smile; I painted a sleeping kitten inside the cup that would be revealed when they had finished her tea. 
Figure 6: Cup, Manises, Spain. 1625-1700. Victoria and Albert Museum, item 447-1903

Figure 7: The sleeping cat is revealed...


Bowl
Shape: Again, there is no generic bowl shape for this time period. Shapes range from stumpy to sloped and footed (Figure 9). My bisque options were flat bowls with wide rims or more rounded, sloped bowls. I chose the second shape as it was more like those I’d seen on various museum sites.

Figure 9: Bowl, 1400 – 1425, Manises, Spain. British Museum item no: G.543


Decoration:  The craftsmen of Manises decorated both the outside and inside of bowls to varying degrees. It appears that the finer the item, the more intricate the decoration. Figures 10 & 11 show the inside and outside of a Spanish bowl with arabic inspired design. According to the listing at V&A for this item “A shipment by a leading Italian exporter of Spanish pottery, ordered from the Valencian potter Asmet Zuleima in 1407, lists 199 pieces of lustre ceramics, including ‘three large bowls, their covers painted out- and in-side’.”. When I was researching these bowls, I was rather pleased to find the bowl shown in Figure 10 as it helps support my choice of decorating 1/3 of Elizabet’s plate.


Figure 10: Inside of Lidded bowl, 1440-1460, Manises, Spain. V&A Museum item 7659:1, 2-1862


Figure 11: Outside of Lidded bowl, 1440-1460, Manises, Spain. V&A Museum item 7659:1, 2-1862

As the bowl is the final item made for this set, I wanted it to tie into the cup and plate but experiment with another way of displaying Elizabets heraldry. Figure 12 shows a typical bowl from Manises displaying lustre decoration and a heraldic device. Rather than paint the full device in the centre of the bowl (difficult with the curved sides), I decided to paint three cats around the edge. I retained the red on white decorative elements for the inside of the bowl and painted the outside with the white on red decoration. This is not entirely true to the use of elements shown by the Manises glazers however it fits well with the other items in the set.

Figure 12: Bowl, Manises, Spain, 1500. V&A museum, item 550-1864




Things learned:
* It is very difficult to paint the inside of the curved cup. Solution: lack works best as you can get away with only two coats minimising the chance of errors.
* Black glaze stains white ceramic and will never cleanly scrape off. Solution: paint a white undercoat or two underneath any black glaze that may need scraping. This prevents the black from soaking into the bisque
* Glaze on the outside of the bowl will come off on your hands (and the table) as you roll it around while painting. Solution: Paint the inside of the bowl first then upend it so it rests on it’s unpainted rim while the outside decoration is completed.
* Three layers of glaze will thicken even the finest of lines. Solution: The trick to balancing this is ensure you use lines of different thicknesses to put the ‘thin’ ones in perspective.



The set.

Project summary 

Motivation:
Because I could.

Materials: Bisque ceramic cups with underglaze decoration

Year:  ~
1450, Manises, Spain.

How historically accurate is it?
The bisque shapes are reasonably close to the parameters of extant pieces. The glazing technique is accurate however the glazes utilised are modern in composition due to safety reasons and other concerns. The three variations of the decorative elements are also quite close to medieval extant items.

Hours to complete: ~
40

Total cost:
$80 in materials

Satisfaction with finished products: 8/10

Additional resources:
Victoria & Albert museum - http://collections.vam.ac.uk/
British Museum - http://www.britishmuseum.org/





Places to paint ceramics in Australia


Melbourne
Glaze it Studio
328a Glen Eira Rd
Elsternwick
http://www.glazeit.com.au

All FiredUp
568 Hampton Street
Hampton
http://www.afu.com.au/

Brisbane
Tea andBisque-it
Shop 3 Sandgate Arcade
Cnr Brighton Rd & Cliff St
Sandgate
http://www.teaandbisque-it.com.au/

Sydney
Colour MeMine
Shop 4, 29 Holtermann Street
Crows Nest

http://www.crowsnest.colourmemine.com/

Adelaide
The PugMill
17a Rose Street,
Mile End
http://www.pugmill.com.au/
(also a good place to buy home supplies, assuming you have a kiln)

Perth
Fired!Ceramic Cafe
29 Winton Rd,
Joondalup
http://www.firedcafe.com.au/

Make yourmark
8/2 Hulme Ct
Myaree
http://www.makeyourmarkartcafe.com.au/